The amount of heat needed to raise the temperature of one pound of
water one degree Fahrenheit. BTU is used to signify the heating and
cooling capacity of a system and the heat losses and gains of buildings
and homes.
The number of BTUs produced in one hour.
A heat pump system that uses a loop of buried plastic pipe as a
heat exchanger. Loops can be horizontal or vertical.
The ratio of heating or cooling provided by a heat pump (or other
refrigeration machine) to the energy consumed by the system under
designated operating conditions. The higher the COP, the more efficient
the system.
The central part of a heat pump system. The compressor increases
the pressure and temperature of the refrigerant and simultaneously
reduces its volume while causing the refrigerant to move through
the system.
A heat exchanger in which hot, pressurized (gaseous) refrigerant
is condensed by transferring heat to cooler surrounding air, water
or earth.
The actual efficiency of a heating or cooling system is reduced
due to start-up and shut-down losses. Over-sizing a heating or cooling
system increases cycling losses.
A device for recovering superheat from the compressor discharge
gas of a heat pump or central air conditioner for use in heating
or preheating water.
Any of several types of combustible fuels formed from the decomposition
of organic matter. Examples are natural gas, propane, fuel oil,
oil, and coal.
A heat pump that uses the earth as a heat source and heat sink.
A device designed to transfer heat between two physically separated
fluids or mediums of different temperatures.
A mechanical device used for heating and cooling which operates
by pumping heat from a cooler to a warmer location. Heat pumps can
extract heat from air, water, or the earth. They are classified
as either air-source or geothermal units.
The medium--air, water or earth--which receives heat rejected from
a heat pump.
The medium--air, water or earth--from which heat is extracted by
a heat pump.
A heat pump system that uses groundwater from a well or surface
water from a lake, pond, or river as a heat source. The water is
returned to the environment.
A method of calculating how long it will take to recover the difference
in costs of two different heating and cooling systems by using the
energy and maintenance cost savings from the more efficient system.
A heating system used during extremely cold weather when additional
heat is needed to moderate indoor temperatures. May be in the form
of fossil fuel or electric resistance.
| U.S |
Canadian |
| 1 gallon |
.8 gallon (3.78 liters) |
| 1 foot |
.304 meter |
| 1,000 feet |
304.8 meter |
| 1 BTU |
252 calories (grams) |
| Fahrenheit Celsius |
= (F-32) * 5\9 |
| Example: |
40F = approximately 4.44C |
|